Shopping Online

Shopping Online

Bit field

no comment

A bit field is a data structure used in computer programming. It consists of a number of adjacent computer memory locations which have been allocated to hold a sequence of bits youth football uniforms packages, stored so that any single bit or group of bits within the set can be addressed. A bit field is most commonly used to represent integral types of known, fixed bit-width.

The meaning of the individual bits within the field is determined by the programmer; for example, the first bit in a bit field (located at the field’s base address) is sometimes used to determine the state of a particular attribute associated with the bit field.

Within microprocessors and other logic devices, collections of bit fields called “flags” are commonly used to control or to indicate the intermediate state or outcome of particular operations. Microprocessors typically have a status register that is composed of such flags, used to indicate various post-operation conditions, for example an arithmetic overflow football uniform manufacturers. The flags can be read and used to decide subsequent operations, such as in processing conditional jump instructions. For example, a je (Jump if Equal) instruction in the x86 assembly language will result in a jump if the Z (zero) flag was set by some previous operation.

A bit field is distinguished from a bit array in that the latter is used to store a large set of bits indexed by integers and is often wider than any integral type supported by the language. Bit fields, on the other hand, typically fit within a machine word, and the denotation of bits is independent of their numerical index.

Bit fields can be used to reduce memory consumption when a program requires a number of integer variables which always will have low values. For example, in many systems storing an integer value requires two bytes (16-bits) of memory; sometimes the values to be stored actually need only one or two bits. Having a number of these tiny variables share a bit field allows efficient packaging of data in the memory.

In C and C++, native implementation-defined bit fields can be created using unsigned int, signed int, or (in C99:) _Bool. In this case, the programmer can declare a structure for a bit field which labels and determines the width of several subfields. Adjacently declared bit fields of the same type can then be packed by the compiler into a reduced number of words, compared with the memory used if each ‘field’ were to be declared separately.

For languages lacking native bitfields, or where the programmer wants strict control over the resulting bit representation, it is possible to manually manipulate bits within a larger word type. In this case, the programmer can set, test, and change the bits in the field using combinations of masking and bitwise operations.

Declaring a bit field in C

The layout of bit fields in a C struct is implementation-defined. For behavior that remains predictable across compilers, it may be preferable to emulate bit fields with a primitive and bit operators:

A simple example of a bitfield status register is included in the design of the eight-bit 6502 processor. One eight-bit field held seven pieces of information:

Another example is the Unix exit status code, which can be used as a flag word to pass status information to another process. For example, a program which monitors the status of eight burglar alarm switches could set the bits in the exit code, passing along to another process information about which of the switches are closed or open.

A subset of flags in a flag field may be extracted by ANDing with a mask. In addition, a large number of languages, due to the shift operator’s (<<) use in performing power-of-two ((1 << n) evaluates to



{\displaystyle 2^{n}}

) exponentiation, also support the use of the shift operator (<<) in combination with the AND operator (&) to determine the value of one or more bits.

Suppose that the status-byte 103 (decimal) is returned, and that within the status-byte we want to check the 5th flag bit. The flag of interest (literal bit-position 6) is the 5th one – so the mask-byte will be





{\displaystyle 2^{5}=32}

. ANDing the status-byte 103 (0110 0111 in binary) with the mask-byte 32 (0010 0000 in binary) evaluates to 32, our original mask-byte, which means the flag bit is set; alternatively, if the flag-bit had not been set, this operation would have evaluated to 0.

Thus, to check the nth bit from a variable v, we can perform the operation:

Writing, reading or toggling bits in flags can be done only using the OR, AND and NOT operations – operations which can be performed quickly in the processor. To set a bit, OR the status byte with a mask byte. Any bits set in the mask byte or the status byte will be set in the result.

To toggle a bit, XOR the status byte and the mask byte. This will set a bit if it is cleared or clear a bit if it is set.

Share This:

Tags: ,

Comments are closed.

fodbold hat online | Billige Nike Fotball Jerseys online | Kelme Outlet

MCM Rucksack | Kelme Outlet | maje dresses outlet| maje dresses for sale

kelme paul frank outlet new balance outlet bogner outlet le coq sportif outlet online shopping shop online